SP-HR01B-10G

SP-HR01B-10G is a single-port PoE surge protector designed for exterior complex backhaul and networking applications with an IP 40 rated Aluminum alloy shell. It supports 8 lines network signals and provides surge protection for PoE wires. 10KV surge protection and four Level protection for SPD technology. Peak Surge Current up to 20KA. It supports not only 10/100/1000Mbps of data rates, but also 2.5/5/10GbE NBase-T. Ideal for 100W(max) PoE wires and well protects your devices against surge damage.

SP-HR01B-10G operates from -40℃ to +65℃ and works with voltage of 44-57Vdc. PoE In port should always be connected to device which you want it to be protected.

Both RJ45 ports connect to network over Cat5e/Cat6 cables which is very conveniently and tightly. It can be easily installed with 2 mounting holes.

Parameter Description
Key Features 10GbE data rates
Provide 10KV surge protection and 4 Level protection for 4 PoE wires   simultaneously
Peak Surge Current up to 20KA per PoE wire
Wide temperature at -40℃ to 65℃ even up to 85℃ can be   outdoor use by covered with waterproof case
No local power is needed
Part Number SP-HR01B-10G
Ports condition PoE In Port*1, PoE Out Port*1
Regulatory Compliance IEEE802.3bt
RoHS Compliance
WEEE Compliance
Pass Through Data Rates 10/100/1000 Mbps & 2.5/5/10GbE
Input & Output Pin Assignment and Polarity:
4/5 (+), 7/8 (–) and 3/6(+),1/2(-)
Operating Voltage :44-57Vdc, (Max 60Vdc)
Maximum Operating DC Current :1A for 2 pairs,
2A for 4 pairs
Maximum 100W
Working Environment Operating Temperature: -40℃ to 65℃
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40℃ to 85℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Max Discharge Current: 20KA(8/20us,2.5KA per line)
Protected Line: 1,2,3,4,5,6,7,8
Common Mode Protection Level(10/700us): 10KV
Differential Mode Protection Level(10/700us): 6KV
Clamping Voltage(Line to GND): 300V
Clamping Voltage(Line to Line): 10V
Insertion Loss @10MHz/100MHz -1db
Return Loss @10MHz/100MHz: -20db
Response Time 5ns
Mechanical Characteristics Case: Aluminium alloy
Color: White
Mounting: Wall-mounted
IP Rated: IP40
Connectors: Shielded RJ-45
Size: 156mm X 53mm X 38mm
Weight: 240g(0.84lb)
Safety Approvals CE

Hỗ trợ